20 Steel E-Track O-Ring Tie-Down Anchors for E-Track Tie-Down System Tie Down...

Description

20 Steel E-Track O-Ring Tie-Down Anchors for E-Track Tie-Down System, Tie Down Cargo Loads to E-Track Rails (Not Included) in Enclosed/Flatbed Trailer, Truck, Van, Pickup, DC Cargo Mall
20 Portable E-track O rings, perfect for securing cargo
-
Each E track O ring is made out of
strong steel
that weighs just a pound and has an assembly break strength of 4,500 pounds and a
safe working load limit
of 1,500 pounds
-
Compatible with the E-track and A-track tie-down systems (not included)
-
These O rings make
great anchors for tiedown straps
like ratcheting and cam straps, ropes, bungee cords, motorcycle straps, boat tie-down cables, etc
-
Just press the lever on the spring fitting and insert into a slot on
any Etrack
rail or single (available from DC Cargo Mall on Amazon)
- Small enough and strong enough
for use on pickups, boats, campers, trailers, trucks, vans, and other tight spots where you need a reliable tie down - clip in and clip out as needed
-
Also available in a heavy-duty version, with an assembly break strength of 6,000 pounds and a working load limit of 2,000 pounds
The total safe working load limit is determined by ADDING together:
» half of the working load limit of each tie-down that goes from an anchor point on the vehicle to an anchor point on an article of cargo;
» the working load limit of each tie-down that is attached to an anchor point on the vehicle, passes through, over, or around the article of cargo, and is then attached to an anchor point on the same side of the vehicle;
PLUS
» the working load limit of each tie-down that goes from an anchor point on the vehicle, through, over, or around the article of cargo, and then attaches to another anchor point on the other side of the vehicle
» Remember: a securement system is only as strong as its weakest component. Stay safe!
If you have any further questions, feedback, or issues regarding your E-track tie-down ring purchase, just email or give us a call at; we look forward to hearing from you!
THESE TIE-DOWN ANCHORS ARE MIRACLE WORKERS! They make it possible to tie down ANYTHING from motorcycles to boats to tractors to kayaks to musical instruments to ATVs to refrigerators to furniture...
THESE O-RINGS HAVE SPRING FITTINGS welded on to the metal. They can only be placed in slots of E-Track systems (NOT INCLUDED), unless you want to weld them directly onto your truck, making them permanent.
ONCE YOUR O-RING is clipped into a slot on an E-Track rail or single (NOT INCLUDED), use it to anchor any tie-down: chains, ratchet straps,cam buckle straps, motorcycle tie-downs, tarp straps, bungee cords, rope, kayak tie-down straps, etc.
E-TRACK NOT INCLUDED. Assembly break strength of 4,500 pounds and a SAFE WORKING LOAD LIMIT OF 1,500 POUNDS.